The Burton Flight Attendant snowboard mannequin from the 2017-2018 winter season was a directional, all-mountain board designed for versatility and efficiency in varied snow circumstances. Characterised by a directional camber profile and a medium flex, it aimed to offer a steadiness of stability at greater speeds and maneuverability in tighter terrain. This board appealed to intermediate and superior riders in search of a dependable platform for carving, powder runs, and navigating difficult slopes.
Launched throughout a interval of rising curiosity in versatile all-mountain snowboards, this particular mannequin catered to riders who most well-liked a single board for various using types. Its design allowed for assured dealing with on groomed runs, whereas its form and development supplied enough float in powder. The mix of directional camber and medium flex made it a beautiful possibility for riders looking for stability with out sacrificing maneuverability. This skill to carry out effectively in varied circumstances and cater to a spread of talent ranges contributed to its reputation.
This dialogue will additional discover the board’s design options, together with its directional form, camber profile, and development supplies. Moreover, the efficiency traits, audience, and general reception throughout the snowboarding neighborhood can be examined.
1. Directional Form
The directional form of the 2018 Burton Flight Attendant performed an important position in its efficiency traits and meant using model. Designed for primarily ahead motion, this form influenced how the board interacted with the snow and terrain, contributing to its distinct all-mountain capabilities.
-
Nostril and Tail Design
The Flight Attendant featured an extended nostril and shorter tail. This design aspect facilitated float in powder and offered stability at greater speeds. The longer nostril helped forestall the board from sinking in deep snow, whereas the shorter tail allowed for faster turns and maneuverability.
-
Sidecut Radius
The sidecut radius, defining the curve of the board’s edge, was doubtless designed to enhance the directional form. This radius impacted flip initiation and general carving efficiency. Whereas the precise radius would differ primarily based on board size, it typically contributed to a clean, managed journey on groomed runs.
-
Stance Setback
Directional boards typically incorporate a setback stance, the place the rider’s bindings are positioned barely additional again from the middle of the board than on a twin-shaped board. This setback additional enhances float in powder and stability at velocity, aligning with the Flight Attendant’s all-mountain designation.
-
Influence on Driving Model
The directional form made the 2018 Flight Attendant much less appropriate for change using (using backwards) in comparison with twin-shaped boards. This design alternative prioritized efficiency in ahead using, catering to riders centered on carving, powder runs, and exploring assorted terrain.
The directional form, at the side of different design components just like the camber profile and flex, contributed to the 2018 Burton Flight Attendant’s versatile all-mountain efficiency. This particular form catered to riders prioritizing stability, float, and management in various snow circumstances, emphasizing ahead motion and exploration over freestyle using. Understanding this attribute is essential for appreciating the board’s meant function and audience.
2. Directional Camber
The 2018 Burton Flight Attendant employed a directional camber profile, an important aspect influencing its efficiency traits. Directional camber blends conventional camber with a rockered nostril. The camber part underfoot offers edge maintain and responsiveness on groomed runs, producing highly effective turns and stability at velocity. The rockered nostril, rising sooner than on a historically cambered board, enhances float in powder and improves maneuverability in variable snow circumstances. This mix made the Flight Attendant versatile, permitting riders to confidently navigate each groomed pistes and off-piste terrain.
Think about a rider transitioning from groomed runs to ungroomed powder. With directional camber, the board maintains grip and responsiveness on the packed snow. Upon getting into the powder, the rockered nostril lifts the board, stopping it from sinking and sustaining momentum. This seamless transition highlights the sensible significance of directional camber for all-mountain using. Conversely, a purely cambered board may battle in deep snow, whereas a totally rockered board may lack the precision and stability desired on groomed runs.
Directional camber represents a design compromise geared toward maximizing versatility. Whereas maybe not excelling in any single space, it offers a balanced efficiency throughout a spectrum of circumstances. This design alternative aligned with the Flight Attendant’s meant use as an all-mountain board able to dealing with various terrain. Recognizing the results of directional camber is crucial for understanding the board’s strengths and limitations and for making knowledgeable choices about gear choice primarily based on particular person using preferences and terrain decisions.
3. Medium Flex
The 2018 Burton Flight Attendant’s medium flex score considerably contributed to its all-mountain versatility. Flex, referring to a snowboard’s stiffness, dictates how readily it bends and responds to rider enter. A medium flex sits between a smooth and stiff flex, providing a balanced efficiency profile. This attribute allowed the Flight Attendant to carry out capably in varied circumstances, from carving on groomed runs to navigating powder and tackling variable terrain.
A medium flex offers enough responsiveness for exact edge management and highly effective activates groomed slopes. Nevertheless, not like stiffer boards designed primarily for high-speed carving, the Flight Attendant’s medium flex allowed for simpler maneuverability in tighter areas and thru difficult snow circumstances. This adaptability proved helpful in timber, moguls, and different off-piste environments. Moreover, a medium flex absorbs vibrations and impacts extra successfully than a stiff flex, providing a smoother and fewer fatiguing journey in uneven snow. This attribute enhanced consolation and management in variable circumstances.
Think about a state of affairs involving a descent on a mixed-condition slope. The medium flex allowed riders to take care of stability and management at greater speeds on firmer patches, whereas nonetheless enabling nimble changes and easy turns in softer sections. This steadiness made the Flight Attendant a super alternative for riders looking for a single board able to dealing with various terrain. Understanding the implications of medium flex is essential for assessing the board’s efficiency traits and suitability for particular person using types and preferences. This attribute highlights the board’s meant use as a flexible all-mountain device, balancing efficiency and accessibility for a broad vary of riders.
4. All-Mountain Versatility
The 2018 Burton Flight Attendant’s defining attribute was its all-mountain versatility. This stemmed from a deliberate mixture of design components, enabling competent efficiency throughout a variety of snow circumstances and terrain. The board’s directional form, directional camber profile, and medium flex labored synergistically to offer a balanced journey, catering to riders who prioritized adaptability over specialization. This versatility stemmed from the necessity for a single board able to dealing with groomed runs, powder, and variable snow circumstances encountered all through a typical day on the mountain.
Think about a hypothetical state of affairs: a rider begins the day carving on freshly groomed corduroy. The Flight Attendant’s directional camber and medium flex offered the mandatory edge maintain and responsiveness for exact turns and secure efficiency at velocity. Because the day progresses and the rider ventures into off-piste terrain with ungroomed snow and powder pockets, the directional form and rockered nostril facilitated float and maneuverability. Later, encountering chopped-up snow and variable circumstances, the medium flex absorbed vibrations, providing a smoother journey. This adaptability eradicated the necessity to change boards all through the day, a key benefit for all-mountain riders.
The emphasis on all-mountain versatility displays a broader development in snowboarding in the direction of adaptable gear able to dealing with various terrain. The 2018 Flight Attendant exemplifies this development, providing a balanced efficiency profile appropriate for intermediate and superior riders looking for a single board for various circumstances. Recognizing the design decisions contributing to this versatility offers invaluable perception into the board’s meant function and efficiency capabilities. This understanding permits riders to make knowledgeable choices about gear choice primarily based on particular person wants and using preferences. Whereas specialised boards may excel in particular circumstances, the Flight Attendant prioritized adaptability, providing a dependable and gratifying expertise throughout a wider spectrum of terrain.
5. Intermediate to Superior Riders
The 2018 Burton Flight Attendant’s design particularly focused intermediate to superior snowboarders. A number of elements contributed to this focus, together with the board’s efficiency traits and meant using model. The directional form, directional camber, and medium flex demanded a sure stage of rider competence to unlock their full potential. Learners may discover these traits difficult to handle, whereas skilled riders may leverage them for exact management and dynamic efficiency.
Think about the board’s efficiency in powder. The directional form and rockered nostril facilitated float, however successfully maneuvering in deep snow required expertise and approach. Equally, the directional camber and medium flex enabled aggressive carving on groomed runs, however demanded management and precision to stop edge catch. An intermediate rider progressing to superior strategies would profit from these traits, steadily growing the abilities obligatory to take advantage of the board’s capabilities. Conversely, a newbie may discover the board overly responsive and tough to regulate, hindering talent growth. A extremely superior rider focusing totally on freestyle or park using may desire a board with a distinct form, flex, and camber profile.
The give attention to intermediate to superior riders highlights the Flight Attendant’s place inside Burton’s product line. It served as a stepping-stone for riders transitioning from beginner-friendly boards to extra specialised gear. This focusing on emphasizes the significance of matching gear to talent stage for optimum efficiency and delight. Deciding on a board applicable for one’s talent stage maximizes studying potential and minimizes frustration, contributing to a optimistic snowboarding expertise. The Flight Attendant occupied a selected area of interest throughout the market, catering to riders looking for a flexible all-mountain board able to dealing with various terrain whereas demanding a sure stage of competence to unlock its full potential.
6. Float in Powder
The 2018 Burton Flight Attendant’s skill to drift in powder stemmed from a mix of design options working in live performance. The directional form, characterised by an extended nostril and shorter tail, performed an important position. This design displaces snow in the direction of the longer nostril, lifting the entrance of the board and stopping it from sinking in deep powder. This raise, mixed with the rockered nosean upward curve beginning sooner than on a conventional camber profilefurther enhances float by growing the floor space on the entrance of the board. The setback stance, positioning the rider barely behind the board’s heart, enhances these options by shifting weight in the direction of the tail, additional leveraging the nostril’s lifting capabilities. These design decisions, working synergistically, allow the rider to take care of velocity and management in deep snow with out expending extreme vitality.
Think about a rider descending a steep, powder-filled slope. The Flight Attendant’s longer nostril and rocker profile naturally rise within the deep snow, stopping the board from submerging. This enables the rider to take care of momentum and make managed turns with out the entrance of the board diving. The setback stance additional enhances this impact, stopping the rider from being thrown ahead. The mixed result’s a clean, managed descent in powder circumstances, permitting the rider to expertise the easy glide attribute of well-designed powder boards. Conversely, a board missing these options would are likely to sink in deep snow, requiring larger rider exertion and doubtlessly resulting in lack of management.
Float in powder is a essential efficiency attribute for all-mountain snowboards just like the 2018 Flight Attendant. This functionality expands the board’s usable terrain, permitting riders to confidently discover ungroomed slopes and deep snow circumstances. Whereas not a devoted powder board, the Flight Attendant’s design options offered enough float to boost the general all-mountain expertise. Understanding the interaction of those design components offers invaluable perception into the board’s efficiency traits and meant use. This understanding helps riders choose gear applicable for his or her using model and most well-liked terrain.
7. Secure at Velocity
Stability at velocity is a essential efficiency attribute for the 2018 Burton Flight Attendant, instantly influencing rider confidence and management, notably on groomed runs and at greater velocities. A number of design components contribute to this stability, permitting riders to take care of composure and execute exact maneuvers even in difficult circumstances. Analyzing these components offers invaluable perception into the board’s meant use and audience.
-
Directional Form and Camber
The mixture of a directional form and directional camber profile contributes considerably to stability at velocity. The longer nostril and rocker profile present raise and forestall the board from diving, whereas the camber part underfoot maintains edge grip and responsiveness. This mix permits for managed turns and prevents velocity wobbles, a typical difficulty with much less secure boards at greater velocities.
-
Medium Flex
The medium flex score offers a steadiness between responsiveness and stability. Whereas a softer flex may really feel unstable at velocity, and a stiffer flex could possibly be unforgiving, the medium flex of the Flight Attendant absorbs vibrations and maintains composure, permitting riders to take care of management with out extreme effort.
-
Sidecut Radius
The sidecut radius, although particular measurements differ relying on board size, performs a task in stability. A well-designed sidecut enhances the board’s different traits, facilitating clean flip initiation and stopping the board from feeling catchy or unpredictable at velocity.
-
Development and Supplies
The interior development of the board, together with the core supplies and fiberglass layup, contributes to torsional stiffness and general stability. These supplies affect how the board responds to forces at excessive speeds, resisting twisting and sustaining a constant edge grip, additional enhancing stability.
These components work synergistically to ship a secure journey at velocity, a defining attribute of the 2018 Burton Flight Attendant. This stability permits riders to confidently push their limits on groomed runs and preserve management in variable snow circumstances. For intermediate and superior riders looking for a flexible all-mountain board able to dealing with greater speeds with out compromising management, the Flight Attendant’s give attention to stability turns into an important think about gear choice.
8. 2017-2018 Season Mannequin
The designation “2017-2018 season mannequin” is essential for understanding the 2018 Burton Flight Attendant throughout the context of snowboard know-how and market availability. This designation signifies the mannequin yr for which the board was designed, manufactured, and launched on the market. This timeframe offers essential context for evaluating the board’s options, know-how, and relevance throughout the broader evolution of snowboard design.
-
Mannequin 12 months Significance
Snowboard know-how, like many different client merchandise, undergoes steady growth. The mannequin yr designation permits shoppers to establish a board’s placement inside this evolutionary timeline. The 2017-2018 season signifies the interval throughout which the Flight Attendant was thought-about a present mannequin, incorporating Burton’s newest technological developments and design philosophies at the moment. This designation helps differentiate it from earlier or later iterations of the Flight Attendant or different Burton snowboards.
-
Availability and Market Context
The 2017-2018 season mannequin designation signifies when the board was available within the retail market as a brand new product. As subsequent mannequin years are launched, older fashions are usually phased out. Understanding this lifecycle is essential for potential patrons, because it informs buying choices. These particularly looking for a 2018 Flight Attendant would doubtless must discover the used market or remaining new previous inventory, recognizing that its options and know-how may replicate the design developments of that particular interval.
-
Technological Context
The 2017-2018 timeframe offers a technological benchmark for assessing the Flight Attendant’s options. Evaluating the board’s specs and development to fashions from earlier or later years reveals the trajectory of snowboard design and technological developments inside Burton’s product line. This evaluation offers insights into the evolution of supplies, development strategies, and design philosophies.
-
Discontinuation and Legacy
The truth that the 2018 Flight Attendant is not a present mannequin highlights the continual evolution of snowboard know-how. Its discontinuation paves the way in which for newer fashions incorporating up to date designs and supplies. Recognizing this cycle permits for a extra knowledgeable analysis of the board’s place throughout the broader historical past of snowboarding gear. Its legacy resides in its contribution to the development of all-mountain snowboard design and its affect on subsequent fashions.
Understanding the “2017-2018 season mannequin” designation offers an important framework for evaluating the 2018 Burton Flight Attendant. This designation situates the board inside a selected technological and market context, informing buying choices and providing insights into the evolution of snowboard design. Recognizing this temporal context is crucial for a complete understanding of the board’s options, efficiency traits, and general relevance throughout the snowboarding panorama.
9. Discontinued Product
The 2018 Burton Flight Attendant’s standing as a discontinued product considerably impacts its availability and market dynamics. Discontinuation usually happens when a producer ceases manufacturing of a specific mannequin, typically to introduce newer iterations with up to date designs, applied sciences, or market positioning. This course of is frequent throughout the snowboarding business, pushed by steady innovation and evolving client preferences. Understanding the implications of discontinuation is essential for potential patrons looking for this particular mannequin.
The first consequence of discontinuation is decreased availability. Retailers usually deplete present inventory, and the product is not accessible for buy by means of commonplace retail channels. This shortage typically drives demand throughout the used market, the place costs might fluctuate primarily based on situation, demand, and general market dynamics. Potential patrons looking for a 2018 Flight Attendant should navigate the secondary market, exercising due diligence relating to situation and authenticity. Moreover, discontinued merchandise might lack producer help, together with guarantee protection and substitute elements availability. This issue warrants cautious consideration, particularly for objects topic to put on and tear, similar to snowboards.
The discontinued standing of the 2018 Burton Flight Attendant necessitates a strategic method for acquisition. Potential patrons ought to discover on-line marketplaces, used sporting items shops, and neighborhood boards devoted to snowboarding. Thorough analysis relating to pricing developments and situation assessments is essential to creating knowledgeable buying choices. Whereas discontinuation presents challenges, it additionally creates alternatives for discerning patrons to accumulate sought-after fashions at doubtlessly advantageous costs. Recognizing the implications of discontinuation offers a practical perspective on availability, pricing, and potential limitations relating to producer help. This understanding empowers potential patrons to navigate the market successfully and make knowledgeable choices aligned with particular person wants and circumstances.
Incessantly Requested Questions
This part addresses frequent inquiries relating to the 2018 Burton Flight Attendant snowboard. The data offered goals to supply readability and help potential patrons in making knowledgeable choices.
Query 1: The place can one buy a 2018 Burton Flight Attendant?
As a discontinued mannequin, the 2018 Flight Attendant is not accessible by means of licensed retailers. Potential patrons ought to discover on-line marketplaces specializing in used sporting items, native used sporting items shops, and on-line snowboarding communities or boards.
Query 2: What’s the typical value vary for a used 2018 Flight Attendant?
Pricing varies primarily based on situation, measurement, and site. Researching comparable listings on related platforms offers an affordable estimate. Components similar to situation of the bottom, edges, and prime sheet considerably affect market worth.
Query 3: Are substitute elements accessible for this discontinued mannequin?
Acquiring substitute elements for discontinued snowboards may be difficult. Contacting Burton instantly or licensed restore facilities may yield restricted choices. Exploring on-line boards and communities devoted to snowboarding may additionally present leads on sourcing elements.
Query 4: How does the 2018 Flight Attendant examine to newer Burton all-mountain fashions?
Newer fashions doubtless incorporate up to date supplies, applied sciences, and design philosophies. Researching present Burton all-mountain choices and evaluating their specs to the 2018 Flight Attendant offers insights into developments in snowboard design. Consulting skilled snowboard evaluations can provide additional comparative evaluation.
Query 5: What’s the beneficial talent stage for using the 2018 Flight Attendant?
This mannequin is usually suited to intermediate to superior riders. Its directional form, camber profile, and medium flex require a sure stage of competence for optimum management and efficiency. Learners may discover these traits difficult, whereas skilled riders can leverage them successfully.
Query 6: What are the important thing upkeep concerns for this board?
Common waxing, edge sharpening, and base repairs are important for sustaining optimum efficiency and lengthening the lifespan of any snowboard, together with the 2018 Flight Attendant. Consulting skilled tuning companies or researching correct upkeep strategies ensures applicable care.
Cautious consideration of those ceaselessly requested questions aids in making knowledgeable choices relating to the acquisition and upkeep of a 2018 Burton Flight Attendant snowboard. Thorough analysis and understanding of the board’s traits, availability, and potential limitations are important for a optimistic possession expertise.
The next part will provide concluding ideas on the 2018 Burton Flight Attendant, summarizing its key attributes and general legacy throughout the context of all-mountain snowboard design.
Ideas for Driving a Board Just like the 2018 Burton Flight Attendant
Directional all-mountain boards just like the 2018 Burton Flight Attendant require particular using strategies to maximise efficiency and delight. The next ideas provide steerage for successfully using such boards in varied snow circumstances.
Tip 1: Weight Distribution in Powder
Keep a centered or barely set-back stance in powder. Keep away from leaning too far ahead, which might trigger the nostril to dive. Distributing weight evenly permits the rockered nostril to raise naturally, sustaining float and management.
Tip 2: Edge Management on Groomed Runs
Interact the sting successfully for highly effective carving on groomed runs. Directional camber requires deliberate edge engagement to provoke and preserve turns. Exact strain management permits for clean, managed arcs.
Tip 3: Navigating Variable Snow Situations
Keep a balanced stance and adapt to altering snow circumstances. The medium flex offers adaptability, however lively weight distribution and edge management are important for sustaining stability and management in combined snow and chopped-up terrain.
Tip 4: Velocity Management and Stability
Handle velocity successfully, notably on steeper slopes. The directional form offers stability at greater speeds, however correct velocity management is essential for sustaining maneuverability and avoiding uncontrolled descents.
Tip 5: Terrain Choice and Board Capabilities
Choose terrain applicable for the board’s all-mountain design. Whereas versatile, boards just like the Flight Attendant are greatest suited to groomed runs, powder, and combined circumstances. Keep away from terrain primarily designed for freestyle or park using.
Tip 6: Common Upkeep for Optimum Efficiency
Keep the board’s base and edges by means of common waxing and sharpening. Correct upkeep ensures optimum efficiency and extends the lifespan of the board. Think about skilled tuning companies for complete care.
Tip 7: Understanding Board Limitations
Acknowledge the board’s limitations. Whereas versatile, a directional all-mountain board might not excel in extremely specialised areas like freestyle or excessive backcountry using. Understanding these limitations permits for lifelike expectations and knowledgeable terrain decisions.
By following the following pointers, riders can successfully make the most of the capabilities of directional all-mountain snowboards just like the 2018 Burton Flight Attendant, maximizing efficiency and delight in varied snow circumstances. These strategies permit riders to adapt to altering terrain and unlock the board’s full potential.
The next concluding part summarizes the important thing attributes and general legacy of the 2018 Burton Flight Attendant, contextualizing its contribution to the evolution of all-mountain snowboard design.
Conclusion
The 2018 Burton Flight Attendant represented a selected level within the evolution of all-mountain snowboard design. Its mix of directional form, directional camber, and medium flex supplied a balanced efficiency profile catering to intermediate and superior riders. Key attributes included stability at velocity, float in powder, and flexibility throughout assorted terrain. As a discontinued mannequin, its availability is now confined to the used market, requiring potential patrons to navigate the secondary market strategically. Understanding its design philosophy and audience offers essential context for evaluating its relevance throughout the broader panorama of snowboarding gear.
The Flight Attendant’s legacy lies in its contribution to the continuing pursuit of versatile all-mountain efficiency. Its design decisions replicate the need for a single board able to dealing with various circumstances, empowering riders to discover the mountain with confidence and flexibility. Whereas know-how continues to advance, the 2018 Flight Attendant stays a noteworthy instance of a selected design philosophy geared toward maximizing all-mountain versatility.
